600-960 MHz Psat 53 dBm High Power UHF Amplifier RF Linear
Amplifier For wireless communications, radar systems
Description
The 600-960 MHz Psat 53 dBm High Power UHF Amplifier is a
specialized device designed to amplify radio frequency (RF) signals
within the ultra-high frequency (UHF) band, specifically in the
frequency range of 600 MHz to 960 MHz. Here's a detailed
introduction to this high-power amplifier:
Frequency Range: This amplifier operates within the UHF band, covering frequencies
from 600 MHz to 960 MHz. The UHF band is commonly used in various
communication systems, including mobile communications, television
broadcasting, wireless microphone systems, and industrial
applications.
Psat and Power Output: The amplifier provides a Psat (saturated output power) of 53 dBm,
which is equivalent to approximately 200 watts (200W) of power.
This high-power output level is suitable for applications that
require substantial power amplification within the specified
frequency range.
Applications: The 600-960 MHz Psat 53 dBm High Power UHF Amplifier finds
applications in a wide range of fields, including
telecommunications infrastructure, broadcasting stations, RF
testing and measurement, wireless data transmission, and industrial
RF equipment.
Performance Features: These amplifiers are designed to provide high gain and efficiency
while maintaining signal integrity and stability. They often
include features such as low noise figure, high linearity, and wide
bandwidth to meet the demands of modern RF systems.
Reliability and Durability: High-power UHF amplifiers are engineered for reliability and
durability, ensuring long-term performance and robustness in
various operating conditions.
Compact Design: Despite their high power output, many high-power UHF amplifiers
are designed to be compact and efficient, making them suitable for
integration into different systems and applications where space and
power consumption are considerations.
In summary, the 600-960 MHz Psat 53 dBm High Power UHF Amplifier is
a critical component in RF systems requiring substantial power
amplification within the UHF frequency range. It offers high
performance, reliability, and versatility, making it suitable for a
wide range of communication, broadcasting, testing, and industrial
applications that demand significant power output.
Specification
Specifications subject to change without notice. Typical
performance at +28VDC +25oC, and in a 50Ω system.
| RF / ELECTRICAL |
| PARAMETER | MIN | TYP. | MAX | UNIT |
| Operating Frequency | 600 | | 960 | MHz |
| RF INPUT | | 0 | | dBm |
| Psat Power Output | | 53 | | dBm |
| Gain | | 53 | | dB |
| Power Gain Flatness | | ±1.5 | | dB |
| In/Out Impedance | | 50 | | Ω |
| Input Return Loss | | -15 | | dB |
| Spurious Signals | | | -60 | dBc |
| Harmonic Signals@ Pout-200W(dB) | | -25 | | dBc |
| Operating Voltage | | 220 | | AC |
| Current@pout: 53 dbm CW | | | 2 | A |
| MECHANICAL |
| PARAMETER | VALUE | UNIT |
| Dimensions (W x H x D) | 483×178×465 | mm |
| RF Connectors (Input / Output) | SMA- KFD/ N-type Female | -- |
| Control Connector | DB9 | -- |
| AC Connector | XCM | |
| Power indicator light | green(Normal) | |
| Standing wave fault indicator light | red(Alarm ) | |
| Cooling | Heat Sink with Integrated Cooling Fan | -- |
| Mounting | | -- |
| Weight | ≤20 | kg |
| ENVIRONMENTAL / PROTECTIONS |
| PARAMETER | MIN | MAX | UNIT |
| Operating Temp. (Housing Temp.) | -22 | +55 | °C |
| Humidity Range | 0-90 | % |
| Max RF Input | +10 | dBm |
| PA Baseplate Shutoff Temperature | +85 | °C |
| High VSWR Protections | Power Amplifier has open/short port protection Configure Input and Output Isolators | |
| INPUT/OUTPUT PINS |
| AMPLIFIER CONNECTOR TYPE: | DB9 |
| TRIAD CABLE PART NUMBER: | —— |
| PIN NUMBER | LABEL | DESCRIPTION |
| 1 | Amp Enable | TTL Hi= Enable, TTL Lo = Disable or No Connection |
| 2 | GND | GND |
| 3 | FWD | Forward Power Detection (TTL Hi= Normal , TTL Lo =Fault ) |
| 4 | REV | Reverse Power Detection(TTL Hi= Normal , TTL Lo = Fault ) |
| 5-9 | NC | NC |
| INPUT PINS |
| AMPLIFIER CONNECTOR TYPE: | XCM |
| TRIAD CABLE PART NUMBER: | —— |
| PIN NUMBER | LABEL | DESCRIPTION |
| 1 | L | firing line |
| 2 | N | null line |
| 3 | FG | rack earth |
| Human-computer interaction interface |
| Human-computer interaction type | 2.8-inch LCD display |
| Output information | Monitoring parameters include: 1,Output power； 2,temperature； 3,Fault information(High VSWR) |
Our Company
Shinewave Technology Co., Ltd, Nanjing is a company specializing in
the research and development, production and sales of RF microwave
passive components and subsystems. The company's product field
covers a variety of microwave communication devices, including RF
power amplifier, RF microwave filters, horn /Microstrip Antenna,
isolators & Circulators, which are widely used in cellular
wireless, aerospace, satellite, Mil-Spec, CATV/Broadband, RFID,
test instrumentation, diagnostic imaging and many more fields
worldwide.
In order to meet the special requirements of customers, in addition
to standard products, we provide customized production solutions.
With experienced experts and specialists, our company has
comprehensive production and strong design capabilities.
Wholeheartedly, we provide customers with high-quality products and
on time delivery services.
As a result of our high quality products and outstanding customer
service, we have gained a global sales network reaching Britain,
America, Japan, Italy and south East Asia. If you are interested in
any of our products or would like to discuss a custom order, please
feel free to contact us. We are looking forward to forming
successful business relationships with new clients around the world
in the near future.
Our R&D
Showroom
Participation in exhibitions
Why choose us
Staffing
Over ten years' OEM/ODM experience.
R&D team with doctor,master degree talents.
Products covers a wide range of applications.
TECHNICAL SUPPORT
Fast Response
Provide Project Technical AdviceTo Provide Customers With Quality
Pre-Sales/Post-Sales Service
PRODUCT SUPPLY
Full Spectrum Products Available
Customer Needs As A Guide
To Provide Customers With Customized Products And Solutions
PRODUCT QUALITY
All Have Passed Various Performance Tests Before DeliveryTo Ensure
That The Product is Good And Stable During Use
Certifications
FAQ
Q1. Could I get a sample before bulk order?
Yes, we offer the sample for all models but charged.
Q2. What should I do if I don't know about frequency in my country?
Please feel free to contact us with your inquiry, we will find the
frequency you need and offer help to your problems.
Q3. Do you accept OEM/ODM order?
Yes, we can customize the brand logo, colors, and frequencies.
Q4.Shipment Date
| Sample | 20 business days |
| ≤50 pcs | 60 business days |
| >50 pcs | 90 business days |
| >200 pcs | Negotiate |
Q5: Delivery Date of the sample by DHL/FedEx
| USA/Canada/Europe/Asia | 3-5 days |
| Middle East/Latin American | 5-7 days |
| African | 3-7 days |
